FAQ

A: The windshield washer nozzle gets relocated into the grate located in the middle of the Jeep, directly below the windshield. All you have to do is cut out one front-to-back slot and two left-to-right slots, and the nozzle will pop right in. For newer JKs equipped with two nozzles, this process is repeated for the second nozzle. You can see the nozzle mounted in the lower left-hand corner of the first picture and which grates need to be cut in the second.

A: All holes required to mount the hood are pre-drilled. The only holes not pre-drilled on the JK hood are to remount the safety latch and spring in the front of the hood. JL hoods have all the required holes pre-drilled.

A: Yes, that line is completely normal. It is a by-product of the manufacturing process and is not a defect.